Quality Influencing Factors

China's annual demand for a large number of plastic products consumes a lot of energy. And the recycling and reuse of waste plastics, which is a low-carbon economy promote the needs of society, but also an urgent need to face. The plastic recycling machine industry needs to improve the production process technology, reduce environmental pollution, and give comprehensive consideration. To product quality and energy efficiency to pursue a more comprehensive and coordinated as well as more sustainable development. Plastic recycling machines break away from the single, high energy-consuming production mode and embark on the road of combined, intelligent production methods.

Here is the content:

• Picking

• Feeding

• Melting

• Filtration

• Cooling

Picking

Many plastic recycling machine manufacturers may tell you that waste plastic foam does not need to be picked and sorted before production. But this is for users whose raw material quality is not much different.

If you have 100 kg of dirty material in one ton of raw material, as a manufacturer, we suggest you pick the following material, it is still necessary. Let the 900kg of good material play its value.

Feeding

To ensure the cleanliness of the raw material during plastic recycling machine operation, we have to make sure that the production environment is neat and hygienic. Especially around the feeding port, to eliminate the accumulation of dust and not let external conditions affect the quality of our melting.Do not let external conditions affect the quality of our melting.

Melting

Melting is an important part of foam recycling. As we all know, the lower the melting temperature the whiter the material is, but this low we have to grasp the temperature well. Experience is also important.

Filtration

Filtering is mainly for the social material, foam after use and transportation of the surface must be attached to all kinds of impurities. Some are not easy to see with the naked eye, but with a hand, a wipe must have a layer of ash dust, such impurities can be filtered out through the configuration of the motor head.

The old plastic recycling machine does not have the distribution of a dynamic screen changer head, and the production of particles is blacker.

Cooling

Pumping cooling is to facilitate the cutting of pellets, such as the water tank being too short will cause uneven cooling to be not complete. The direct consequence is cutting the pellets when they bond to a piece, which will seriously affect the appearance of the particles.

In addition to the above factors, we also need to find a professional plastic recycling machine factory to choose waste plastic recycling machinery. In addition to quality assurance, there are manufacturers with production experience and technical guidance is also quite important.

ACERETECH's mission is to create a comfortable, stress-free life for our customers and their customers, and this is the mission we most certainly accept! Easy-to-use, hygienic and top-quality products, and customer service that eliminates purchasing challenges. We strictly implement quality control measures, continuously improve plastic recycling machine quality, provide competitive products and satisfactory services to our customers, and pass the awareness of quality services to every employee.