Safety matters to be noted for plastic recycling machine

Because the knowledge of operating the machine is not good enough, so many times are due to misuse and mechanical failure. The correct operation of a plastic recycling machine (including a plastic pellet machine, single-screw pellet machine, waste plastic pellet machine, etc.) has the use of extending its life. However, the use of plastic recycling machines in our daily life does not get enough attention, and also will cause some unnecessary problems. When using a plastic recycling machine pay attention to those issues it.

Here is the content:

• Preparation work and external conditions

• Operation process

• Monitoring

Preparation work and external conditions

1, Plastic recycling machine operation should be strict to the requirements of the operating procedures. Do not be in the non-operating station for unauthorized operation. To ensure the reliability of safety devices, not to pursue efficiency to destroy the machine's safety precautions.

2, Plastic pellet machine operation, the material temperature does not reach the set temperature. Insulation time is not enough, are not allowed to run the screw.

3, By training and familiar with the plastic recycling machine structure performance and operating procedures of the operator to operate.

4, Pay attention to fire safety, fire extinguishers need to be placed near the use of heat-conducting oil equipment.

5. For plastic recycling machine production work, the operator is not allowed to leave the post to do other work. It must leave the post and should stop or find another equipment operator to look after.

Operation process

1, Do not use metal impurities or sediment of low quality back to the material. The feed port near the metal objects may not be placed, to prevent intensification of the screw, barrel wear, or produce jamming, or damage phenomenon.

2, Plastic recycling machine operation to use cleanliness, viscosity, and other indicators are in line with the requirements of the hydraulic oil. The provisions of the oil cooler provide sufficient flow of cooling water, to avoid hydraulic components and pipelines due to oil pollution or high-temperature blockage, oil leakage, and other damage. The extruder should be filled with lubricants to meet the requirements of the reducer.

3, Clean up the barrel, screw, and die on the sticky residue. Must use a bamboo or copper tool to clean up, not allowed to use steel knife scraping material or fire barbecue parts on the residue.

Monitoring

1, Plastic recycling machines in normal production should also often observe the main motor ammeter pointer swing changes. There is a long-time overload work phenomenon, to stop in time to find out the cause of the failure and remove it before continuing production.

2, Check the bearing parts, and motor shell working temperature, using the back of the hand to gently touch the test parts;

3、Any malfunction or abnormal condition in plastic recycling machines must be reported to relevant personnel and handled by professional maintenance personnel. If any abnormal phenomenon affecting safety is found, press the emergency stop switch immediately.

ACERETECH adopts modern enterprise management methods, based on product quality management, with excellent quality, novel design, reasonable price, and perfect after-sales service to win the full trust of customers and unanimous praise.