 |
A-VOC2000
ACERETECH
Waste Plastic Recycling Machine With VOC Dehumidification And Drying System
VOC dehumidification and drying system
The modified granular feedstock is conveyed under negative pressure to the VOC homogenising and deodorising silo and the deodorising temperature is adjusted to the right state. At the same time, the raw materials in the VOC homogenising and deodorising bin are continuously ground and homogenised to achieve a homogenising and deodorising effect.
| Raw material & formula | Plastic Granules |
| Final product | Particles after removal of odor |
| Output capacity | 2000kg/h |
VOC Deodorization Drying Tower
Equipment Features：
For diffusing hot air into the holding barrel for deodorizing raw materials.
The barrel structure conforms to the principle of fluid mechanics, allowing the air to diffuse evenly and completely remove odours.
Bottom-blowing air inlet design, which reduces the temperature difference between the top and bottom and enhances the deodorising effect.
The inlet system is equipped with a cut-off suction box to effectively clean the pipes and avoid blockage.
Overheating protection device to reduce accidents caused by human or mechanical failure.
Precision temperature controller, D.P..
special PLC programming, VOC homogenisation and deodorisation time sufficient for deodorisation time.
Cooling Silo:
Equipment Characteristics:
The material is used to cool the raw material.
Gun barrel made of s30408 material, easy to clean and avoid corrosion.
Transparent visible material window for easy inspection of the raw material in the barrel.
The use of conical diffusers for more efficient cooling.
the height of the discharge opening from the floor can be determined according to the height specified by the customer.
Homogenizing conveying system
Equipment Characteristics:
For conveying granular materials.
Vacuum hopper discharge with increased open mould casting to prevent bridging and smooth transport.
Two-stage cyclone dust collector and expanded filter cartridge design, easy and fast maintenance.
Equipped with a vacuum destruction valve to protect the fan [above 5.5kW].
Plastic Recycling Machine(Clik The key Word To More Quality Products) | ||
| Plastic Pelletizing Machine | Shredder | Crusher |
| Plastic Washing Line | Pulverizer Machine | |
Waste Plastic Recycling Machine With VOC Dehumidification And Drying System
VOC dehumidification and drying system
The modified granular feedstock is conveyed under negative pressure to the VOC homogenising and deodorising silo and the deodorising temperature is adjusted to the right state. At the same time, the raw materials in the VOC homogenising and deodorising bin are continuously ground and homogenised to achieve a homogenising and deodorising effect.
| Raw material & formula | Plastic Granules |
| Final product | Particles after removal of odor |
| Output capacity | 2000kg/h |
VOC Deodorization Drying Tower
Equipment Features：
For diffusing hot air into the holding barrel for deodorizing raw materials.
The barrel structure conforms to the principle of fluid mechanics, allowing the air to diffuse evenly and completely remove odours.
Bottom-blowing air inlet design, which reduces the temperature difference between the top and bottom and enhances the deodorising effect.
The inlet system is equipped with a cut-off suction box to effectively clean the pipes and avoid blockage.
Overheating protection device to reduce accidents caused by human or mechanical failure.
Precision temperature controller, D.P..
special PLC programming, VOC homogenisation and deodorisation time sufficient for deodorisation time.
Cooling Silo:
Equipment Characteristics:
The material is used to cool the raw material.
Gun barrel made of s30408 material, easy to clean and avoid corrosion.
Transparent visible material window for easy inspection of the raw material in the barrel.
The use of conical diffusers for more efficient cooling.
the height of the discharge opening from the floor can be determined according to the height specified by the customer.
Homogenizing conveying system
Equipment Characteristics:
For conveying granular materials.
Vacuum hopper discharge with increased open mould casting to prevent bridging and smooth transport.
Two-stage cyclone dust collector and expanded filter cartridge design, easy and fast maintenance.
Equipped with a vacuum destruction valve to protect the fan [above 5.5kW].
Plastic Recycling Machine(Clik The key Word To More Quality Products) | ||
| Plastic Pelletizing Machine | Shredder | Crusher |
| Plastic Washing Line | Pulverizer Machine | |
