Home » Products » All Products » Plastic Pelletizing Machine » PET Filament Plastic Machine Recycle

Share to:

PET Filament Plastic Machine Recycle

ACS-H (PET) compaction and pelletizing system: Size reduction per heating and pelletizing, 3-in-1 integrated recycling system. Reduced investment in high performance machines. It provides higher output but with lower energy consumption.

Availability:



Inquire

Model:
ACH-PET
Brand:
ACERETECH

PET Filament Plastic Machine Recycle

Introduction:

The PET Filament Plastic Machine Recycle is very efficient and important in plastic recycling. This machine plays an important role in pet recycling.The ACS-H (PET) uses compaction and pelletizing system: Size reduction per heating and pelletizing, 3-in-1 integrated recycling system. Reduced investment in high performance machines. It provides higher output but with lower energy consumption.

Product Paramenters

SPECIFICATIONS
Machine Model	ACS Series
Target Recycled Material	HDPE, LDPE, PP, BOPP, CPP, OPP, PA, PC, PS, PU, ABS
Final Product Shape	Particles
System Composition	Belt Conveyor, Cutting Compactor, Single Screw Extruder, Filtration,Pelletizer, Water Cooling Device, Dehydration Section,Conveyor Fan, Product Silo.
Output Range	150kg/h-1200kg/h
Feeding Device	Belt Conveyor (Standard), Roll Hauling off device (Optional)
Compactor Volume	300L-1600L
Diameter of Screw	80mm-180mm (Standard)
Material of Screw	38CrMoAlA (SACM-645), Bimetal (Optional)

L/D of Screw	31/1, 32/1, 34/1, 36/1 (According to the characteristics of recycling)
Heater of Barrel	Ceramic heater or Far-infrared heater
Cooling of Barrel	Air cooling of fans through blowers
Vacuum Deashing Exhaust	Two Double-zone vacuum degassing system (Standard)
Pelletizing Type	Water-ring pelletizing/ water-strands pelletizing/ Under-water pelletizing
Voltage Standard	According to the Voltage of the Customer's Location
Optioanl Device	Metal detector, Roll hualing off device, Masterbatch and additives feeder
Warranty	13 months from the date of bill of lading
Technical Services	project design, factory construction, installation and recommendations, commissioning

L/D of Screw	31/1, 32/1, 34/1, 36/1 (According to the characteristics of recycling)
Heater of Barrel	Ceramic heater or Far-infrared heater
Cooling of Barrel	Air cooling of fans through blowers
Vacuum Deashing Exhaust	Two Double-zone vacuum degassing system (Standard)
Pelletizing Type	Water-ring pelletizing/ water-strands pelletizing/ Under-water pelletizing
Voltage Standard	According to the Voltage of the Customer's Location
Optioanl Device	Metal detector, Roll hualing off device, Masterbatch and additives feeder
Warranty	13 months from the date of bill of lading
Technical Services	project design, factory construction, installation and recommendations, commissioning

Machine Model

Compactor

Single Screw Extruder

	Volume (Liter)	Motor Power (kw)	Screw Diameter (mm)	L/D	Extruder motor (kw)	Output capacity (kg/h)
ACS-H300/80	300	37	80	36	AC 55	160-220
ACS-H500/100	500	75	100	36	AC 110	300-380
ACS-H800/120	800	110	120	36	AC 160	450-550
ACS-H1000/140	1000	132	140	36	AC200	600-700
ACS-H1200/160	1200	160	160	36	AC250	800-1000
ACS-H1600/180	1600	200	180	36	AC315	1000-1200

Product Advantages:

Compared with other plastic recycling and granulating units, The PET Filament Plastic Machine has the following advantages. First of all, this machine is specially designed for pet raw material, it will be more efficient in working and the pelletizing effect will be more accurate. Secondly, compared with other machines, this machine will reduce a lot of noise, to ensure that the customer's work space is quiet. Finally, this pet machine can reduce energy consumption for customers and get more accurate and cleaner pellets.

Product Quality：

Our team in order to ensure that the problem of the machine, in the process of machine design and installation, many times to compare the details of the accessories on the market, just to let the customer to get a high efficiency work machine at the same time can also delay the service life of the machine. In terms of craftsmanship, our senior engineers combine European technology with our traditional technology to ensure that the machine work is both advanced and solid.

Services and Support:

We offer the following services and support to our clients. First, one-stop program design. Before the customer places an order, we will design a suitable machine according to the customer's raw material, output requirements and the use of the material at a later stage. Second, machine start-up test. After we finish the design and production of the machine, we will be the first time to discuss with the customer to start the test with raw materials, at the same time, the customer can accept the machine on site. Finally, the customer receives the machine found problems can be the first time to contact us, we will provide reasonable solutions.

Conclusion:

The ACS-H (PET) uses compaction and pelletizing system: Size reduction per heating and pelletizing, 3-in-1 integrated recycling system. Reduced investment in high performance machines. It provides higher output but with lower energy consumption.This pet machine is designed in different sizes and models according to the output of the raw material. At the same time, it has less noise, lower energy consumption and higher efficiency than traditional machines. In terms of product service, we provide customers with one-stop service, design a series of recycling machines for customers, and, provide customers with 24-hour online consulting service.

ACH-PET001 ACH-PET002

Belt conveyor

Provide transportation of plastic materials, such as film, filament, Raffia. If you want to feed the film in rolls into the compactor, our hauling roller is optional. The feeding speed is automatically adjusted by the inverter according to the fullness of the compactor.

Metal Detector

If metal is detected in the material by the metal detector, a warning will be issued and the belt conveyor will be stopped.

Compactor

The arc-shaped plate guides the material into the extruder. This compactor combines pre-heating, pre-dry and size reduction to ensure a fast and stable feeding process.

Rotating And Fixed Blade

The rotating blade and fixed blade cut the material into small flakes. The friction heating generated by the high-speed rotating blades will per-heat and shrink the flakes.

Single Screw Extruder

Our unique design single screw extruder gently plasticizes and homogenizes the materials. Our bi-metal extruder has great anti-corrosion resistant, wear resistant and long life time.

Double Vacuum Degassing Zones

With double vacuum degassing zones, volatile such as micro-molecules and moisture will be removed efficiency to improve the quality of granules, especially suitable for the heavy printed materials.

None-stop Piston Type Filter

* Long screen lifetime, lower screen change frequency: Long filter lifetime owing to large filter areas.

* Easy to use and none-stop type: easy and quick screen change and do not need to stop the running machine.

* Very low operation cost.

Back Flush Filter

Black flush filter technology works by guiding clean melt to flow from the back of the screen to clean the small surface area of the screen. Due to the small surface area of the screen to be washed, high-speed cleaning can be realized at the screen, so as to achieve the best cleaning efficiency.

Automatic Strand Pelletizer

The materials will be pushed out from die section and moved into the pelletizer by water through automatically.

Manual Strand Pelletizer

The materials will be pushed out from die section and cooled by water. The air knife dried the materials. Then the materials will be cutted by strand pelletizer.