Features of Plastic Washing Line

Plastic washing line has two kinds of film cleaning lines, one is the waste plastic PP/PE film cleaning line. The other is the waste plastic HDPE bottle cleaning line. The two cleaning lines are different but also have their advantages. Here we look at these two plastic washing lines.

Here is the content:

• Waste plastic PP / PE film cleaning line features

• Waste plastic HDPE bottle cleaning line features

Waste plastic PP / PE film cleaning line features

1. Waste plastic PP / PE film plastic washing line suitable for all kinds of films and PP woven bags with sediment content up to eighty percent.

2. Adopt a circulating water system to ensure the cleaning effect while controlling the water flow and evaporation volume.

3. The core part of the pre-treatment module adopts a wear-resistant design to ensure long time continuous operation of the system.

4. Pre-crushing and pre-washing system efficiently removes most of the sediment and other impurities. It can protect the subsequent equipment, and significantly improves the service life of the fine crushing and cleaning system.

5. targeted design of the fine crushing system, the crushed film size is uniform and easy to clean.

6. High-speed centrifugal plastic washing line system with suitable rotating speed to different materials to apply the corresponding blade hitting strength to achieve the cleaning effect.

7. Cleaning pool drum is designed for strong pressure underwater cleaning to remove residual impurities to a greater extent; claw-type uniform speed discharge to ensure uniform discharge while controlling water content, providing a process basis for the dewatering module.

8. The film drying technology combining centrifugal dewatering, screw extrusion, and high-temperature hot air will strictly control the moisture content of the finished product within 5%. It is suitable for high-quality granulation requirements.

9. After theoretical calculation and many times actual measurements, the mechanical operation details of the crushing, and cleaning. And drying links are adjusted to avoid material loss due to excessive processing.

10. Automatic control of the whole plastic washing line, and the system between the units associated with the operation. And the maximum capacity at the same time for possible abnormalities has a predetermination function to ensure the safety of the system.

Waste plastic HDPE bottle cleaning line features

1. suitable for all kinds of plastic products with high toughness and thickness between about 1-25 mm for cleaning.

2. Adopting circulating water to ensure the cleaning effect while controlling the water flow and evaporating water.

3. crushing system with wear-resistant design to ensure long continuous operation of the system.

4. high-speed centrifugal plastic washing line system with suitable rotating speed to different materials to apply the corresponding blade hitting strength to achieve the best cleaning effect.

5. cleaning pool drum for strong pressure underwater cleaning design to maximize the removal of residual impurities.

6. can be equipped with the corresponding centrifugal dewatering and hot air drying system according to the water content set by the production requirements.

7. After theoretical calculation and many times actual measurements, the mechanical operation details of the crushing, and cleaning. And drying links are adjusted to avoid material loss due to excessive processing.

Plastic washing line has been developed intelligently and is widely welcomed in industrial enterprises. Save manpower, material, and financial resources for production workers and enterprises. It is the responsibility of every manufacturer to produce CNC bending machines that meet the standards to ensure the interests of consumers and the healthy development of the market.