AWS-HDPE Cheap Waste Bottle Recycling Line

Belt Conveyor (For Material Feed In)

For feeding the material into the next equipment (can be designed as per special requirement).

Single-shaft Shredder

* For reduce plastic material size.

* 35% more space inside the cutting chamber built-in hydraulic ram;

* Variable faster ram movement;

* Less space occupied than traditional shredders with horizontal rams;

* Enclosed cutting chamber to prevent;

Belt Conveyor (For Material Feed Out)

Feeding conveyor to the next machine.

L Type belt conveyor connected with the Trommel.

Equipped with pull switch surround the conveyor.

Crusher

* The optimal rotor and crushing chamber design reduces energy consumption and increases production;

* The most ideal rotor blade is particularly suitable for heavy material crushing;

* The precise gap between the rotary knife and the fixed knife and the design of the rotor ensure uniformity of the particles and noise controlled in the lowest range;

Screw Loader

* To convey plastic flakes out of crusher into friction washer;

* Parts, that contact with water are made of SUS304.

Floating tank

For additional separation and cleansing of heavy contaminants with gravity > 1g/cm3 from plastic scraps, the material is pushed underwater to separate off the final heavy contaminants and discharge the material directly into the screw loader.level control via electronic feeler;

Friction Washer

* High speed special rotor, built in mild steel;

* Stainless screen with hole;

* Screen surface cleaning device by water spray nozzles;

* 1 set of water pump for water circulation.

Dewatering Machine

* Multi-purpose unit, will wash the remaining surface contaminants from material and simultaneously dry the plastic flakes;

* Subsequently the flakes will be centrifugally spun and dried;

* Humidity removal efficiency: not less than 98%;

* Washer/dryer housing built in stainless steel welded construction;

* Reinforces, mild circular screen size Φ2mm for higher washing/drying effect.

Pipe Drying System

With connecting pipes to the dryer;

Connecting pipes to the cyclone installed above the thermal dryer;

Parts in contact with material built in stainless steel.

Packaging System With Dust Remover

Storage silo for plastic flakes